Thermo Fisher Scientific targets elemental and isotope analysis

Thermo Scientific EA IsoLink IRMS system

Thermo Fisher Scientific has introduced a system for elemental and isotope analysis.

The elemental analyser (EA) IsoLink isotope ratio mass spectrometry (IRMS) system has applications in food authenticity and origin and food web studies in ecology and biology.

EA-IRMS analysis uses temperature-ramped gas chromatography (GC) for high sample throughput and analytical reproducibility for µg- to mg-level elemental and isotope analysis.

Applications related to origin and adulteration

Jens Griep-Raming, senior manager strategy and business development, Inorganic Mass Spectrometry at Thermo Fisher Scientific, said an example application is use in the detection of economically motivated adulterated honey.

“In this particular application the Thermo Scientific EA IsoLink IRMS System can be used to determine the addition of cheaper sugars, such as high fructose corn syrup (HFCS), to the more expensive honeys. The method of detection is a standard AOAC method, which benefits from the robustness and reproducibility of the EA IsoLink IRMS System,” he told FoodQualityNews.

“Another example of a food fraud application is the analysis of olive oils to determine origin. Using this technique, the origin of the olives used to make the oil can be determined, for example, is it truly Greek olive oil or were olives from Tunisia or Italy used?”

The EA IsoLink EA/IRMS was developed for labs doing elemental analysis to experience higher throughputs at a lower cost-per-sample, without compromising sensitivity or robustness.

It is continuous flow which allows for higher automation, faster analysis times and simultaneous determination of up to three elements/isotope ratios from one sample.

Method to determine isotope ratios

Griep-Raming said in general EA coupled to IRMS is an easy-to-use and rugged method for determination of isotope ratios.

“The EA IsoLink IMRS System features improved gas separation and peak shapes for the combustion gases, using temperature-ramped GC, which uses a temperature ramp during the elution period of a compound to provide optimal chromatographic conditions,” he said. 

“This directly translates to improved peak shapes and increased peak heights, i.e. improved signal-to-noise ratios, and thus improved precision. The improved peak shapes and increased peak heights means that less sample material is required and better precision can be obtained for a given sample size.

“For example, the improved chromatographic approach for EA-IRMS is especially beneficial for sulfur analysis, offering more than a 3-fold increase in peak height. Moreover, continuous flow gas chromatography ensures that you can evaluate the quality of the analysis by ensuring the fidelity of the combustion and pyrolysis processes.”

Analysis of isotopes of Carbon, Nitrogen and Sulfur (CNS analysis) from one sample drop can take 10 minutes, from which sample sizes as small as single digit micrograms of the element can be analyzed. Precision of measurements can be 10 micrograms of the analyte or less.

The Thermo Scientific Helium Management Module is a standard feature on the EA IsoLink IRMS System and reduces helium consumption by more than 60%.

It optimizes flow inside the system to the minimum needed for analysis and other operating modes. This is especially important as global helium shortages increase.

The firm said the possibility of working with less sample size leads to consumption of fewer chemicals, prolonged maintenance intervals and lower cost per sample.

IRMS performance characteristics

Instruments used in IRMS need to be designed to offer the best linearity and stability technically possible, said Griep-Raming.

“Repeatability/reproducibility is enabled by a robust instrument design, rugged sample handling and inlet devices. Selectivity in IRMS is typically achieved by specialized sample inlet devices, such as the EA IsoLink IRMS System for bulk elemental analysis, or the Thermo Scientific GC IsoLink II for compound specific GC analysis,” he said.

“With the EA IsoLink IRMS System, the accessible linear range can be extended to lower sample sizes. Flexibility is also an important feature for many users. The EA IsoLink IRMS System adds to this by enabling sampling from low microgram to multiple milligram amounts and is capable of providing the isotopic analysis for Carbon, Nitrogen, Sulfur, Oxygen and Hydrogen within one system. 

“More specifically, the EA IsoLink IRMS System can cope with the most demanding of sample types, with CNS triple analysis possible on high C/S ratio sample types, such as wood, with outstanding precision.”

Related News

Chemical testing and NIR spectroscopy to fight food fraud

Sting in the tail for jellyfish fraudsters

Picture: Bio21 Institute

Thermo and Bio21 Institute to develop proof of concept lab

Picture: ©iStock

ScanTech Sciences to open ECP food treatment center

Picture: Unia

Thermo Fisher explores partial closure of Swiss site

Peak Scientific expands LATAM office in Brazil

Peak Scientific expands office in Brazil

Sugar content in food and beverages has become a major talking point globally in the past few years

Customers asking us best way of doing routine sugar analyses - Thermo

The transaction is expected to close by the end of Q2 2016

Affymetrix acquisition strengthens biosciences – Thermo Fisher

Dionex Integrion HPIC system

Thermo Fisher Scientific broadens specialist testing center

Bruker's TRACER 5i Handheld XRF Elemental Analyzer

Bruker launches handheld XRF elemental analyser

The GCMS-QP2020 high-end single quadrupole gas chromatograph mass spectrometer

Shimadzu unveils high-end single quad GC/MS instrument

The Intuvo 9000 GC System. Picture: Agilent

Agilent: 'It’s not just about analytical performance anymore. It’s about making GC easier'

Related Products

See more related products

Submit a comment

Your comment has been saved

Post a comment

Please note that any information that you supply is protected by our Privacy and Cookie Policy. Access to all documents and request for further information are available to all users at no costs, In order to provide you with this free service, William Reed Business Media SAS does share your information with companies that have content on this site. When you access a document or request further information from this site, your information maybe shared with the owners of that document or information.